Pure Tube Channel

The high-end, no-compromise design.

Pure tube signal path

Classic pure tube signal path built with a minimalistic approach and minimum passive parts including an input IGS Custom transformer, two military-grade tubes: 6N2P-EW and 6N1P-EW which work in class A and an IGS Custom output transformer. The signal path includes only two Mundorf capacitors to get the best classic tube sound and as low non-harmonic distortion as possible.

High impedance instrument input

A specially designed high impedance instrument input is added for direct recording of guitar, bass or sound modules. The signal is fed directly to the tube grid for classic sound performance. High Z input is also suitable for recording of clean guitars for later use with amp modeling software in your DAW. In this case, your recordings can benefit from a low noise, proper impedance matching and added nice tube coloration for the high-quality final result.

Balanced transformer isolated input and output

The best microphone preamp must have both input and output transformers. They isolate galvanically the preamp from other audio devices, and give the best isolated balanced signals with lowest CMMR and increase the sound quality adding pretty sweet musically harmonics to your recordings. On the backside, PTC is equipped with 2 XLRs and easy to access tube sockets.

  1. Gallery
  2. Specification
  1. Basic features
    Engineer’s custom tube set Yes, 6N2P, 6N1P, 6B23P, 6BC8, 6BZ8
    All stepped manipulators 6 steps Gain / 41 clicks Trim
    Input & Output
    Input Impedance (balanced) 300/1200 Ohm, Carnhill transformer or 1M Ohm for Hi-Z instrument input
    Phantom Power +48V
    Input Pad -20dB
    Output Impedance (balanced) 600 Ohm
    Levels
    Operating Level +4dBu
    Max input level +18dBu
    Max output level +22dBu
    Noise Level -110dB
    Max. gain +65dB
    Bandwidth
    Frequency response 20Hz - 20kHz +/-0.2dB
    Distortion (@ 20 Hz - 20 kHz)
    THD+N <0.1%
    Front Panel
    VU Meters YES, Output Level
    Power
    Voltage 115V/230V, 50-60Hz
    Power consumption 24W
    Power supply Internal, linear
    Packing box
    Shipping weight 6kg